A wall-mounted pegboard kit that arrives ready to hang rather than as a bare board needing a separate hook purchase. Three panels, each 16-in by 23.5-in by 0.8-in, mount side by side to span 48-in of wall, and because they are separate pieces the run can be set as one long strip, stacked, or split between two walls to suit the space available. The panels are pressed from high-strength metal, which is the reason the boards hold their shape under load where a hardboard sheet sags and tears out around the holes. The holes themselves are square, 0.4-in by 0.4-in, and that square profile is what raises the load capacity: a square peg seats against four flat faces instead of pivoting in a round hole, so a loaded hook stays put rather than tilting out. A set of 28 hanging accessories comes in the box and cover the range properly, with 90-degree and 45-degree hooks in both single and double form, straight single and double hooks, square hooks, a circular hook, a screwdriver holder, a drill bit holder and a storage shelf. That mix means round tools, flat tools and small parts all get an appropriate hanger. Screws are included for wall mounting, the whole 17-lb kit goes up with a screwdriver, and the layout is fully customisable for organising tools in garages and studios.